GTA 6 FPS Calculator
Estimate GTA 6 frame rate for your GPU + CPU pairing at 1080p, 1440p or 4K on Low → Ultra. Adds DLSS / FSR / XeSS upscalers and DLSS 3 / FSR 3 frame generation, applies a VRAM-stutter penalty, and returns both an average FPS and an honest 1% low — with a verdict versus your 30 / 60 / 120 / 144 target.
- Engine
- FPS model
- Runtime
- Instant, in-browser
- Platforms
- PC
- Updated
Every GPU review site publishes a static FPS chart. This is a live one. Plug in your GPU, CPU, RAM, resolution and preset — the calculator runs the same model we use for the bottleneck and VRAM tools, layers upscalers and frame generation on top, and returns an estimate you can share as a URL. The 1% low is the honest number: DLSS 3 frame gen pushes the average up, but 1% lows stay tied to the real input frame rate. That's the framerate you feel.
Hits 60 fps · TL;DR
Yes, GeForce RTX 4070 + Ryzen 5 7600X / 7600 hits 60 fps at 1440p High: about 71 fps average, 51 fps 1% low.
Hits 60 fps — 71 avg fps
Calculator
Hits 60 fps
71 avg fps
61–82 fps band (±15%), 51 fps 1% low. GPU-bound at 1440p High.
VRAM clears: 7.8 GB needed at these settings, your card has 12 GB.
Ways to gain frames
- Enable DLSS 3 Frame Gen (+70%) — Doubles perceived smoothness — 1% low unchanged.
- Enable DLSS / FSR Quality (+31%) — Estimated 93 fps (was 71).
- Drop preset to Medium (+25%) — Estimated 89 fps (was 71).
- GPU-bound FPS
- 71
- CPU cap
- 109
- VRAM needed
- 7.8 GB
- Target gap
- +11 fps
FPS by preset — RTX 4070 + Ryzen 5 7600X at 1440p
Same rig, every preset. The ladder follows your GPU, CPU and resolution live.
| Preset | Avg FPS | 1% low | Band |
|---|---|---|---|
| Low | 109 fps | 78 fps | 92–125 |
| Medium | 89 fps | 64 fps | 76–103 |
| High | 71 fps | 51 fps | 61–82 |
| Very High | 59 fps | 42 fps | 50–67 |
| Ultra | 49 fps | 35 fps | 41–56 |
GTA 6 estimated FPS by GPU — 1440p High, Ryzen 7 7800X3D reference CPU
GTA 6 estimated average FPS and 1% low at 1440p High, DLSS / FSR off, DLSS 3 frame generation off, 32 GB DDR5 with a Ryzen 7 7800X3D reference CPU. Model calibrated to RDR2 launch-driver GPU scaling.
| GPU | Avg FPS | 1% low | Verdict |
|---|---|---|---|
| RTX 4090 | 138 fps | 99 fps | Well past 120 fps |
| RTX 4080 | 118 fps | 85 fps | Hits 120 fps |
| RTX 4070 Ti | 104 fps | 75 fps | Well past 60 fps |
| RTX 4070 | 88 fps | 63 fps | Well past 60 fps |
| RTX 4060 Ti | 72 fps | 52 fps | Hits 60 fps |
| RTX 4060 | 61 fps | 44 fps | Just clears 60 fps |
| RTX 3080 | 92 fps | 66 fps | Well past 60 fps |
| RTX 3070 | 74 fps | 53 fps | Hits 60 fps |
| RTX 3060 | 54 fps | 39 fps | Drop to Medium for 60 fps |
| RX 7900 XTX | 122 fps | 88 fps | Hits 120 fps |
| RX 7800 XT | 89 fps | 64 fps | Well past 60 fps |
| RX 6700 XT | 66 fps | 47 fps | Hits 60 fps |
Numbers are model estimates with a ±15% band vs launch-day drivers. Enable DLSS Quality for a ~30% uplift, DLSS 3 frame generation for a ~70% uplift on the average (1% low unchanged). This table is copied from the source model; the live calculator above uses the shared ToolWools engine catalog, so its numbers may differ slightly from the table.
Keep planning your GTA 6 rig
- Check CPU-GPU balance with the GTA 6 bottleneck calculator.
- Check VRAM headroom with the GTA 6 VRAM calculator.
- Full GTA 6 PC requirements checker — minimum, recommended and Ultra tiers.
- Grade the whole rig with the GTA 6 readiness score.
How GTA 6 FPS is estimated for your GPU and CPU
Five stages, from raw silicon score to a 1% low you can plan around.
-
01
Pick your GPU + CPU
Choose from the same 200+ card catalog as the bottleneck calculator. Scores are normalised so RTX 4090 = 100 and i9-14900K / Ryzen 7 7800X3D = 100. We compute a GPU-bound FPS and a CPU cap separately, then take the minimum.
-
02
Set resolution and preset
1080p, 1440p, ultrawide 1440p or 4K, and Low → Ultra. Preset scales GPU load; resolution scales it further. CPU cap softens as resolution rises (CPU-bound at 1080p is normal, CPU-bound at 4K is rare).
-
03
Layer an upscaler
DLSS, FSR or XeSS shrinks the internal render resolution for a 1.25× to 1.75× GPU-side speedup. Quality mode costs the least image fidelity; Performance mode buys the most frames.
-
04
Add frame generation, if your card has it
DLSS 3 and FSR 3 insert a generated frame between two real ones, multiplying average fps by roughly 1.7×. Crucially it leaves 1% lows — and input latency — untouched, so we never let it move the low figure.
-
05
Check the 1% low and the limiter before the average
You get avg fps with a ±15% band, an honest 1% low, the limiter (GPU, CPU, VRAM or balanced) and a pass/fail against 30, 60, 120 and 144 fps. Short on VRAM and a stutter penalty is applied and named.
Example builds and their estimated GTA 6 frame rates
Load any of these into the calculator with one click.
-
RTX 4060 + Ryzen 5 7600X @ 1080p High — 60 fps budget build
Comfortably hits 60 fps at 1080p High native (about 66 fps), clears 85 with DLSS Quality. 8 GB VRAM is fine at 1080p; avoid the HD texture pack.
Load preset -
RTX 4070 + Ryzen 5 7600X @ 1440p High — 1440p sweet spot
About 71 fps at 1440p High native (51 fps 1% low). Enable DLSS Quality for about 93 fps. VRAM 12 GB clears 1440p Ultra without stutter.
Load preset -
RTX 4090 + Ryzen 7 7800X3D @ 4K Ultra — flagship
About 42 fps at 4K Ultra native (30 fps 1% low); DLSS Quality + frame generation lifts the average to about 93 fps, though 1% lows stay near 39. Not CPU-bound at 4K.
Load preset -
RTX 3070 + i5-12400F @ 1440p Ultra — 8 GB caveat
The GPU alone would reach about 42 fps, but the 8 GB card is 4 GB short of the 12 GB pool at 1440p Ultra, so the VRAM stutter penalty cuts it to about 31 fps (15 fps 1% low). Drop to 1440p High + DLSS Quality for about 80 fps.
Load preset
Inside the frame-rate model
GPU-bound FPS = (gpu.score / 100) × BASE_FPS[res] × PRESET_MULT[preset] × UPSCALER_MULT. CPU cap = (cpu.score / 100) × CPU_CAP_100[res]. Effective FPS = min(GPU-bound, CPU cap), reduced by a RAM penalty below 16 GB, further reduced by a VRAM stutter penalty when total needed exceeds the card. Frame generation multiplies avg only. 1% low = avg × 0.72 baseline, tightened when CPU-bound.
gpuBound = (gpuScore / 100) × BASE_FPS[res] × PRESET_MULT[preset] × upscalerMult cpuCap = (cpuScore / 100) × CPU_CAP_100[res] avg = min(gpuBound, cpuCap) avg = ram < 16 ? avg × 0.82 : avg if vramNeeded > cardVram: avg × 0.75, low × 0.50, limiter = VRAM avg = avg × frameGenMult // FG lifts avg only low = avg × (cpuBound ? 0.62 : 0.72) // 1% low band = [avg × 0.85, avg × 1.15]
- GPU/CPU scores use the same 0–100 scale as the bottleneck calculator; RTX 4090 = 100, i9-14900K / Ryzen 7 7800X3D = 100.
- BASE_FPS at 1440p High for a score-100 GPU + score-100 CPU is 102 fps — anchored to measured RDR2 4090 numbers and adjusted for GTA 6's denser Vice City streaming.
- Preset multipliers (Low ×1.55, Medium ×1.25, High 1.00, Very High ×0.82, Ultra ×0.68) match Cyberpunk 2077 and RDR2 preset-scaling curves.
- Upscaler multipliers are the gain over native at matched target resolution (DLSS-Q ×1.30, DLSS-B ×1.50, DLSS-P ×1.75, FSR-Q ×1.28, XeSS-Q ×1.25).
- Frame generation multiplies avg by 1.7× (DLSS 3) or 1.6× (FSR 3); 1% lows are left unchanged because interpolated frames don't reduce real frame-time variance.
- VRAM shortage triggers a 25% avg FPS penalty and a 50% 1% low penalty — the driver spillover behaviour measured in Cyberpunk 2077 at over-budget VRAM configurations.
GTA 6 frame rate questions
Upscaling, frame generation, VRAM stutter and target fps.
-
It depends on GPU, CPU, resolution and preset. As a rough ladder: at 1440p High on 2026 mid-range hardware (RTX 4070 / RX 7800 XT, mid-tier Ryzen 5 or Core i5), expect about 70 fps native. 1080p High gives roughly 90 fps on the same build. 4K Ultra drops to about 42 fps native on a flagship, about 93 fps with DLSS Quality + Frame Gen. Enter your exact parts above for a live estimate.
-
Yes on almost any 2020-and-newer discrete GPU at 1080p. At 1080p Medium, an RTX 3060 / RX 6600 clears 60 fps comfortably. At 1440p High you'll need an RTX 4060 Ti / RX 7700 XT or better. At 4K Ultra, 60 fps native is not realistic on any current card — even a 4090 lands near 42 fps. DLSS Quality + Frame Gen is the way to 60+ at 4K Ultra.
-
At 1080p on a modern flagship (4090, 7900 XTX, 5080+) — yes, natively. At 1440p, 120 fps needs a 4080 / 7900 XT paired with DLSS Quality. At 4K, 120 fps typically requires DLSS Balanced + Frame Generation on a 4090-class card.
-
DLSS Quality typically adds 25–35% FPS by rendering internally at 67% resolution. DLSS Balanced adds 45–55% (rendering at ~58%). DLSS Performance adds 65–80% (rendering at 50%). These are GPU-side multipliers only — a CPU-bound scene won't benefit as much because the CPU cap is unaffected.
-
Not exactly. DLSS 3 / FSR 3 Frame Gen inserts a synthetic frame between real ones, so avg FPS roughly ×1.7. Motion feels smoother, but input latency is tied to the underlying real FPS. 1% lows don't improve. Use FG when your real FPS is already 50+ — below that, latency feels sluggish.
-
The 1% low is the average of the slowest 1% of frames — the number that captures the felt stutter. A game at 100 fps avg / 80 fps 1% low feels smooth; 100 fps avg / 45 fps 1% low feels stuttery. VRAM shortage and CPU bottlenecks tank 1% lows first. This calculator reports both so you can spot the difference.
-
60 fps is the baseline for a modern action game. 90 fps or 120 fps is the sweet spot for smooth camera panning on OLED / high-refresh monitors. 144 fps at 1440p is realistic on RTX 4070+ class with DLSS. GTA 6 doesn't require a specific FPS — pick a target your monitor supports and match hardware to it.
-
Yes at 1080p. Estimated 60–75 fps at 1080p High native, about 86 with DLSS Quality. Not enough for 1440p Ultra — the 8 GB VRAM triggers a stutter penalty at Ultra + HD textures. For 1440p target, the RTX 4060 Ti 16GB or RTX 4070 is the safer buy.
-
Yes at 1440p. Estimated about 69 fps at 1440p High native, about 90 with DLSS Quality. The 10 GB VRAM is adequate but not comfortable — you'll be Adequate at 1440p Very High, Insufficient at 1440p Ultra + HD textures. Drop textures a notch to sidestep it.
-
For upscaling, FSR 3 Quality is within 5% of DLSS Quality on avg FPS gain (measured on Cyberpunk 2077 and Alan Wake 2). Image quality lags DLSS slightly, especially in motion. FSR 3 Frame Generation applies the same ~1.7× multiplier as DLSS 3 FG but runs on non-RTX cards — that's its real advantage.
-
Yes — 16 GB is the calculator's baseline. Below 16 GB the model applies an 18% avg FPS penalty and a 40% 1% low penalty, because Windows plus GTA 6 will hit the pagefile and cause streaming stalls. Going to 32 GB buys headroom for streaming, Discord and a browser open.
-
GTA Online's 30-player lobbies and physics simulation are CPU-bound. This calculator doesn't split by mode — assume 10–15% lower FPS in busy lobbies on the same hardware, and rougher 1% lows. The bottleneck calculator does split by workload if you want a per-mode read.
-
Treat every number as a range, not a reading. The uncertainty band is ±15% versus launch-day drivers. Base FPS values are calibrated from RDR2 (same RAGE engine) and Cyberpunk 2077 (heavy open-world). Upscaler multipliers come from measured Cyberpunk / Alan Wake 2 data. We refresh values within hours of Rockstar's official spec drop.
-
No — ray tracing costs FPS. This calculator doesn't include an RT toggle because RT overhead varies wildly per implementation (reflections only vs full path tracing). If Rockstar ships path tracing at launch, expect 30–50% lower avg FPS with it on. Use the VRAM calculator for RT VRAM overhead.
Frame rate, upscaling and frame-gen terms
- Avg FPS
- Mean frames per second across a benchmark run. The headline number, but it can hide stutter.
- 1% low
- Average of the slowest 1% of frames. Captures felt stutter — a low 1% low means uneven pacing even when avg looks fine.
- GPU-bound
- GPU can't keep up with the CPU. Lowering resolution or preset lifts FPS. Typical at 1440p+ or high presets.
- CPU-bound
- CPU can't feed the GPU frames fast enough. Lowering resolution won't help. Typical at 1080p on strong GPUs.
- Upscaler
- DLSS, FSR or XeSS render internally at a lower resolution, then AI-upscale. Big FPS gain, minor image cost.
- Frame generation
- DLSS 3 / FSR 3 FG inserts a synthetic frame between real ones. Motion feels smoother; input latency and 1% lows are unchanged.
Tools that pair with this FPS estimate
Related tools
Companion guides
- Performance
How we estimate GTA 6 FPS before launch
The exact model behind the FPS calculator — GPU scores, upscaler multipliers, frame-gen caps and the VRAM stutter penalty.
Read guide - Hardware
CPU-GPU pairing for GTA 6
12 common CPU + GPU pairings with the honest verdict — balanced, GPU-starved, or CPU-bound — and why 1% lows fall off first.
Read guide
Sources & methodology references
Changelog
-
v1.2
Rebuilt as a static page. GPU list now comes from the shared ToolWools catalog (34 GPUs), including the RTX 5060, RTX 5060 Ti, RX 9070 series and Intel Arc B580. Ultrawide 1440p now applies its own VRAM multiplier (about 1.34× the 1440p pool), and frame-gen FPS is labelled interpolated, not measured. Use-case FPS corrected to engine-computed values.
-
v1.1
Added FPS-by-GPU featured snippet table at 1440p High, dated deep-linked sources, and external-validator trust chips.
-
v1.0
Launch: 200+ card catalog (shared with bottleneck), Low → Ultra preset math, DLSS / FSR / XeSS + DLSS 3 / FSR 3 FG multipliers, 1% low estimate, VRAM stutter penalty, shareable URL state, dynamic OG image, stacked JSON-LD (SoftwareApplication + HowTo + FAQ + Article + Breadcrumb).